Consider a hypothetical furniture retailer that sells a standing desk to a customer who spent a week comparing models. The desk arrives, the customer assembles it, and then the retailer says nothing for three weeks. When the next message finally arrives, the customer has forgotten why the desk seemed right, which warranty applies, and perhaps the name of the store. Nothing in that silence is dramatic. It is the ordinary course of memory, and it works against the business every day it continues.
The cheapest counter to that drift is a short sequence, not a newsletter. Three or four messages, sent on a fixed schedule over the first few weeks, can each do one job: confirm the purchase, explain the single thing the customer will most likely need, invite a question, and ask for a review only after the product has had time to prove itself. Each message goes to a person who opted in, under the company’s own name, with an unsubscribe link that works. CAN-SPAM and CASL consent rules are enforced by the sending model, so the company does not depend on a staff member remembering the rule at the moment of sending. EEZYPOST sends campaigns of this kind to a company’s own list for $19 a month.
Short sequences succeed for a plain reason. Each message is brief enough to read in full, specific enough to matter, and spaced far enough apart that no recipient feels pursued. A customer who receives a clear warranty note in week one and a usage tip in week two has a reason to remember the company. A customer who receives a promotion in week one, a survey in week two, and a discount in week three has a reason to filter the company out.
Owners of shops, clinics, agencies, and distributors often reach the same question soon after a sale closes: what should a new customer receive, and when? The search tends to turn up either tools built for retailers with far larger lists or a newsletter that goes to everyone on the same day. Neither answers the question for a list of a few hundred to a few thousand contacts.
The gap between a first purchase and a second is where many small firms lose ground. Consider a clinic that completes a consultation in early spring. The patient leaves with a plan, a product, and a clear reason for the visit. Three weeks of silence later, the reason has blurred. The patient remembers the appointment but not the instructions. When the next need arises, a reminder from another provider is easier to act on than a practice that has said nothing since.
A generic newsletter does not close that gap. It arrives on the sender’s calendar rather than the customer’s, and it assumes the reader recalls context the newsletter never supplied. Many small firms send nothing for that reason, or they send one message that tries to serve every customer at once.
A short sequence works differently. Consider an agency that sends three messages over the first three weeks: a note confirming what was delivered, a brief answer to the question clients ask most often afterward, and one invitation to book the next step. Each message refers to the work the client bought, and each goes only to people who agreed to that kind of contact. The sequence is short because the customer’s memory is short. Its consent is clear because the list was built that way.
Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite, and Klaviyo all offer automated sequences, though their setup and suitability differ with list size and with the sender’s goals. A firm weighing them should first compare how each handles import, consent records, and unsubscribes. EEZYPOST sends campaigns to a company’s own list under its own brand, with consent-scoped sending and unsubscribes handled, and the sending model enforces CAN-SPAM and CASL consent rules.
A drip sequence is a fixed series of messages sent to a defined group at set intervals. The sender writes each message in advance, and the schedule runs without new effort for each recipient. A typical series for a new customer opens with a welcome, follows with a short how-to, asks for a review once the product has had time to work, and closes with a reorder reminder timed to the purchase cycle. Each message carries one purpose. When a message tries to do two things, the reader usually does neither.
The method has limits, and they matter more than the schedule. A sequence cannot repair a weak offer. If the product disappoints, the third message only reminds the customer of the disappointment on a timetable. Nor can a sequence rescue a list collected without consent. Mail sent to people who never agreed to hear from the business is unsolicited email, and CAN-SPAM and CASL treat it as such however well it is timed.
Volume is the other constraint. Too many messages, or messages that arrive before the reader expects them, produce unsubscribes and spam complaints. Complaints count against the sender’s reputation with mailbox providers, and that reputation governs whether later mail reaches the inbox at all. Fewer messages, each with a clear reason, hold attention better than a long series that reads as a campaign.
Three controls keep a sequence within bounds. The first is an entry rule: a customer joins because of a specific event, such as a completed purchase, and only if the consent on record covers this kind of mail. The second is an exit rule: a customer leaves the sequence when they reply, when they buy again, or when they unsubscribe, and receives no further message in the series. The third is a visible unsubscribe in every message, honored without delay.
Established platforms handle these mechanics, including Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite and Klaviyo. Each differs in how it builds segments and automation, so a business should compare entry and exit settings directly rather than rely on feature lists. EEZYPOST sends campaigns to a company’s own list under its own brand, with consent-scoped sending and unsubscribes handled on its side. Pricing for each platform appears on its own site.
A sequence for new customers is a short series of messages sent over the weeks after a first purchase. Its purpose is modest: to remind the buyer why they bought, what to do next, and how to reach the business. EEZYPOST sends that series under the company’s own brand, to a list the company has imported and cleaned. The product is described at https://eezypost.net.
The work divides into four parts. The company imports its own contacts, and EEZYPOST cleans the list before anything goes out. Sending stays scoped to the contacts whose consent the company can document. Unsubscribe requests are handled as part of sending, so a reader who wants out leaves without a second step. The company’s name and sender identity appear on every message, which matters to a customer who has just paid and expects to hear from the people who took the money.
Compliance does not rest on the sender’s discretion alone. CAN-SPAM and CASL consent rules are enforced by the sending model. That is a narrower guarantee than a legal review, and it does not replace one. It does mean the consent question is answered at the point of sending rather than in a spreadsheet that nobody opens.
The business schedules the series. It writes the messages, sets the intervals, and EEZYPOST sends the series to the consented list it has imported. The product does not respond to a purchase record by firing a message, and it does not route customers down different paths based on what they click. A business that needs that behavior should compare the options directly. Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite and Klaviyo each offer their own approach to automation, and a buyer should weigh those approaches against the actual requirement.
Consider a hypothetical shop that sells one product line and imports its recent buyers each Friday. It writes three messages: a thank-you with care instructions, a note at the two-week mark asking how the product is performing, and a short reminder of the returns policy. It schedules them for days one, fourteen and twenty-one, and sends them to the contacts with recorded consent. For that plan, the shop needs a clean list and a calendar.
The product costs $19/month.
EEZYPOST costs $19 per month. Pricing details beyond that figure are on the site at https://eezypost.net.
The monthly price covers sending email campaigns to a list the business owns. The business imports its own contacts, and EEZYPOST cleans the list before anything goes out. Each campaign is sent under the company’s own brand, and unsubscribe requests are handled by the platform. The sending model enforces the consent rules of CAN-SPAM and CASL, so a campaign reaches only the contacts whose consent the rules allow. A business that has no consent record for a contact cannot use the platform to reach that contact as though it did.
The price does not, on its own, describe every capability a team might want. This section states only what the price covers: campaigns, a cleaned and imported list, consent-scoped sending, unsubscribe handling, and the company’s brand on every message. Before committing to a plan built around a particular workflow, confirm that the workflow falls within that scope on the site.
Anyone comparing options will meet the same question in Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite and Klaviyo: what does the monthly fee include, and who controls the list when the subscription ends? Each vendor publishes its own current terms, and those terms are the ones to read. The question deserves the same scrutiny for every option.
Each EEZY product is also billed through one central account at https://eezycloud.com/account/, which keeps the billing record in a single place for a company that uses more than one product.
Consider a hypothetical hardware distributor that records about four hundred first-time buyers a quarter. The first week of a drip sequence follows a fixed order, and a skipped step usually surfaces later as a complaint.
On day one, export the new-customer list with its consent records. A bare list of addresses shows who bought. It does not show how each address was collected, which matters when a message goes out under your name. Keep the consent source, the date, and the form language that applied at the time of purchase.
On day two, import the list and run the cleaning step. Remove malformed addresses, duplicates, and anyone who opted out earlier. Cleaning before the first send protects your sending reputation more than any cleanup that follows it.
On day three, confirm consent record by record. Under CAN-SPAM, a business may email a customer who has not opted out, provided the message identifies the sender and includes a working unsubscribe. Under CASL, which governs messages to Canadian recipients, the sender needs express or implied consent. Implied consent from a purchase expires after a period the statute sets, so the purchase date belongs in the record. Mark each contact as sendable, pending, or excluded.
On day four, write the welcome message. Name the business, state why the reader is receiving it, reference the order, and include an unsubscribe line. Keep it short enough to read on a phone.
On day five, schedule the follow-on messages at set intervals, such as day seven, day twenty-one, and day forty-five. Each message carries the same consent scope as the welcome. The intervals are yours to choose.
On day six, send the welcome message and check the results before the next one goes out. EEZYPOST sends campaigns to your own list under your own brand, handles unsubscribes, and applies the CAN-SPAM and CASL consent rules through the sending model. The plan is $19/month. Mailchimp, Constant Contact, Brevo, and MailerLite follow the same sequence, and each lists its pricing on its own site.
For help during setup, support hours are Monday through Friday, 9 AM to 8 PM Eastern, and Saturday and Sunday, 9 AM to 12 PM Eastern, at eezycloud.com/support.
Several established vendors serve this need, and they differ more in shape than in quality. Mailchimp suits a business that wants a general-purpose tool with templates and contact management and needs little beyond a welcome message. Constant Contact tends to fit associations, clinics, and local shops that send periodic announcements and value guided templates and event tools. Brevo suits a business that expects to combine marketing email with SMS or transactional messages. MailerLite suits a small business or a solo operator who wants a plain interface and modest requirements.
ActiveCampaign suits a business whose sequences depend on detailed automation, such as conditional paths and follow-up across several sales stages. Klaviyo is built for ecommerce stores that want purchase history and browsing behavior to shape what each customer receives. A service business without online order data will find much of that design unused.
Buyers should check each vendor’s own site for current pricing, plan limits, and capabilities. These change, and any description of them in an article ages quickly. Pricing for each competitor appears on that vendor’s site.
A business that needs trigger-based branching, such as a path that changes when a customer opens a message or places a second order, should test that capability directly. Build the actual sequence in a trial or free tier if the vendor offers one, send it to an internal test list, and confirm that each branch fires as described. Vendors describe branching in similar terms. The differences usually lie in how conditions are set and what counts as a trigger.
For a short welcome series to your own list, sent under your own brand, EEZYPOST is one option at $19/month. Whether it handles the branching you need is a question for the same test you would run on any other vendor.
A drip sequence sits beside the systems that already record a sale: the point-of-sale terminal, the invoicing tool, the CRM, and the website form that captured the address. Each holds part of the same customer, and each can decide whether that customer may receive email. Disagreement among them is where consent failures begin.
Name one record as the source of consent, and let every other system read from it. That record should hold the address, the date and source of opt-in, the scope of what the person agreed to receive, and any withdrawal. A purchase does not imply consent to promotional mail. When someone unsubscribes, the change must reach the CRM and the invoicing contact list the same day, not at the next manual export.
The owner of that record should be whichever system already handles most contact. A shop that runs its customers through the point-of-sale system keeps the master list there; a firm that works through its CRM keeps it there. Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite, and Klaviyo each import, suppress, and record opt-outs in their own way. Ask any vendor to show how an unsubscribe propagates before the first sequence goes live.
EEZYPOST sends campaigns to a company’s own list under its own brand, with consent-scoped sending, unsubscribes handled, and CAN-SPAM and CASL rules enforced by the sending model. It belongs to the EEZYVERSE family, which gives a company one login across the EEZY products it uses. Each product is also sold on its own site, so a company need not adopt the whole family to adopt one product. A company running several products can settle them all through one central bill at eezycloud.com/account/.
Review the arrangement each quarter, in three checks. Compare unsubscribe rates message by message, since a rise at one step usually signals a message that has outlived its purpose. Reconcile the consent records against every connected list, and correct any mismatch at once. Then ask whether each message still earns its place. A thanks-for-your-order note that has gone unchanged for a year is probably reaching customers who no longer need it.
A drip sequence is a set of emails sent to a new customer at planned intervals, each one following the last after a set delay. EEZYPOST sends campaigns to your own list under your company's brand, within consent-scoped sending rules.
EEZYPOST sends email campaigns to your own list, with imports, list cleaning, consent-scoped sending and unsubscribes handled. Whether it runs a timed multi-message series is a feature to confirm at eezypost.net before you plan a welcome sequence around it.
Usually, yes. CAN-SPAM in the United States requires a working unsubscribe and accurate sender information, and CASL in Canada generally requires consent. The EEZYPOST sending model enforces CAN-SPAM and CASL consent rules. Enroll customers only on the consent they gave, not on assumptions about it.
EEZYPOST costs $19 per month. A buyer evaluating a welcome sequence should budget for that monthly fee from the first day. Pricing details beyond the monthly figure appear on eezypost.net.
This article does not compare sequence features across vendors. Buyers weighing Mailchimp, Constant Contact, Brevo, ActiveCampaign, MailerLite or Klaviyo should read each vendor's current feature and pricing pages directly, then confirm that the workflow they need is supported before committing.
Review how EEZYPOST sends a new-customer sequence, from importing your list to honoring every unsubscribe, for $19 per month. The details are on eezypost.net.
EEZYPOST is part of the EEZYVERSE family: one login, one bill, every EEZY product.
Choose which cookies you allow. Essential cookies are always active because they are required for the site to function.